Hacking smart power outlets with a custom adapter #Hacking #3dPrinting #IoT @ncrmnt « Adafruit Industries – Makers, hackers, artists, designers and engineers! | #hacking | #cybersecurity | #infosec | #comptia | #pentest | #hacker

Andrew needed to stock up on smart power outlets for his lab. He ordered known WiFi-controlled outlets that have previously contained esp8266, so that they could be flashed with esphome. Instead of a very well-known esp8266 module they had a CB2S module from Tuya. These have Beken BK7231N modules inside and are somewhat supported by an Open Source software stack.

The problem flashing these modules on bulk is – you have to disassemble and solder the leads to the edge connector. It’s okay for a one-time solder job, but is a totally no-go when you have to do it in bulk. So, I scratched my head, fired up SolveSpace and after some trial and error made this weird-looking device.

The idea behind it is pretty simple. Just a bunch of spring-loaded pogo pins and a piece of plastic to hold things in place. No soldering, just attach it and remove once you are done.

See more in the post here and the design on Thingiverse.

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here:

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in!

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community!

CircuitPython – The easiest way to program microcontrollers –

Get the only spam-free daily newsletter about wearables, running a “maker business”, electronic tips and more! Subscribe at !

No comments yet.

Adafruit has a “be excellent to each other” comment policy. Help us keep the community here positive and helpful. Stick to the topic, be respectful of makers of all ages and skill levels. Be kind, and don’t spam – Thank you!


Click Here For The Original Story From This Source.

National Cyber Security